All posts

A 70-metre wing opened the line-up screen with no plan on it

On iseeido’s line-up screen, a floor plan sits over the satellite map. You slide the building under the plan and turn the plan until the walls agree. Before build 9, a large place could open that screen with no plan on it at all. The satellite picture was there, and the crosshair, and the controls. There was nothing to line up.

The notes in the code describe the case: a school wing 70 metres long. The screen has a Plan opacity slider, and it made no difference. Nothing was drawn at any setting.

Before build 9 No plan drawn Since build 9 Plan drawn
The line-up screen as a diagram, before build 9 and since. With a large place, the first had a roof and a crosshair and no plan.

A picture laid on the map

The plan on that screen is a picture. iseeido draws the scan’s floor, walls and furniture into an image, and gives it to Google’s map as a ground overlay: an image pinned to the ground at a set size.

The picture is drawn at 4 centimetres to the point. That is fine enough, the code says, to keep doorways and wall thickness legible. A blank border of 12 points goes on every side. So the picture grows with the building. A wing 70 metres long needs 1,750 points, and 1,774 with the border.

The picture’s longer side already had a cap: 2,400 points. Its comment said what it was for, which was to stop a very large scan allocating an enormous texture. It was a guard on memory. At 1,774 points, the wing was well inside it.

The limit nobody had written down

Google’s overlay has a limit of its own, and passing it produces no message. The app’s architecture notes say it in four words: “No error, no log”. The screen just showed bare imagery.

It turned up while the App Store screenshots were being made. In the iPhone 17 Pro Max simulator, plans of 674 and 1,000 points drew. The wing, at 1,774, didn’t. The exact threshold wasn’t pinned down, and the code says so.

Old cap 2400 0 Cap now 674 drew 1000 drew 1774 nothing The limit Long side of the plan's picture, in points
What was seen in the simulator. The limit lies somewhere between 1,000 and 1,774 points, so the cap moved to a size known to draw.

So the cap came down from 2,400 to 1,000, a size that had been seen to draw. The comment above it now carries a warning: not a memory limit, a visibility one.

  • 1,774points on the long side of the 70 metre wing’s picture
  • 1,000the cap since build 9
  • 39 mthe longest plan still drawn at 4 cm to the point
  • 7 cmto the point for the 70 metre wing now

Coarser, not smaller

A lower cap doesn’t shrink a big place. When a plan would pass 1,000 points, the renderer raises the ground each point covers until the picture fits. A plan up to about 39 metres long keeps the full 4 centimetres. The 70 metre wing is drawn at 7.

Its size on the ground stays the same, because of how the overlay is sized. The zoom level the overlay is built with is worked out from the metres each point covers. A coarser picture gets a lower zoom level, and lands on the same ground as before. The scan still sets the scale.

Seven centimetres sounds like a loss. The comment’s answer is that it is still finer than the roofline the plan is matched against.

With the phone in your hand

Since build 9, a large place appears on the line-up screen like any other. The release note is one line: “Large places, like a whole school wing, now appear when you line them up on satellite.”

That one line carries a lot. A new place doesn’t know where it is on Earth, and until it does, no street journey can end at it. Lining it up on satellite is the main way to tell it, and you can do it from anywhere. The support page says the same. With no plan on the screen, there was nothing to turn.

The sample building is one of the coarser plans. Design Centre is made up and ships with the app, and the script that builds it makes a wing 70 metres by 28. So the plan you practise lining up is past the 39 metre mark.

The fix changed one number. What it corrected was the idea of what the number was for.

The arithmetic
  • 70 metres at 4 cm to the point is 1,750 points. Add 12 of border on each side: 1,774.
  • The cap of 1,000 points, less 24 of border, leaves 976. At 4 cm each, that is 39.04 metres.
  • To bring 1,774 points down to 1,000, each point has to cover 1.774 times as much ground: 7.1 cm.
  • The picture is made at one pixel to the point, so these are pixels too.